Products

Custom kit(based on the pic),Neck profile---thickness at 1st fret: 17mm, at 12th fret: 19 mmAll the other details are same as the pic  The building...

Custom Design Guitar Neck (2023-04-26) Ken Smith headstock as pic 2Scale lengh: 34",  neck-through design Length(top to bottom) 1127mm6 stringsNut ...

Standard 60S ST Style Roasted Flamed Maple Electric Guitar Neck (2023) custom,compound radius: 10"-16"（10" at the nut and 16" at the last fret）stai...

Custom Design Headless Electric Guitar as PicturesLocking nutJoint: bolt onZero fretBody: swamp ash with soild mahogany veneerNeck: roasted maple, ...

custom design guitar(based on the pic 1) Headless versionmahogany body curly maple top---same as the pic 1Birdseye maple neck---same as the pic 1ne...

Custom Design Headless Guitar Neck (2023-04-24) similar to kit ZQN-008.  But differences are: Scale length: 24.75" (628 mm) 22 frets maple neck ros...

Custom headless neck(same as the pic)648mm scale lengthRoasted birds eye maple wood(neck+fretboard)black dots and black side dots24 jumbo Stainless...

Custom electric guitar(based on the pic1),Bone nutMaple body Mahogany neckEbony freboard with block inlayWhite headstock inlay(not painting)---same...

Custom Design Logo Service 1. carved logo by laster  2. pearl logo inlay  

This is a custom design guitar, with a special custom logo on the headstock. Only 1 in stock, all the details are the same with the photos. If need...

Maltese Cross 6 String Electric Guitar Mahogany Body  Maple Neck Rosewood FingerboardAll the remaining details are the same as the picture The buil...

neck through design, as pic 2 maple wood24 fretsebony fretboarda left handed version of blanka large blank headstock the building time is about 30 ...

1. Explorer kitBolt on neckMahogany body Dot side inlays as pic 2a humbucker hole in the bridge position and a p-90 hole in the neck position2. Exp...

Custom Design Order (4 strings bass kit) paulownia wood Body  neck and headstock as pic 2 Active electronics--US$20 1 soap bar pickup and 1 volume ...

Custom Design Order (a star based guitar kit ) Mahogany Body Maple Neck Rosewood fingerboardonce the guitar ready, we will take many photos for you...

Custom Design Order (based on Alembic John Entwistle model ) Neck through design we will try our best to use the similar hardware,  the building ti...

Custom Design Order (based on American ultra telecaster kit, Left Hand ) Alder Body, flame maple top with white binding Maple neck Rosewood fingerb...

Custom Design Order (based on American ultra telecaster kit  ) Alder Body, flame maple top with white binding Maple neck Rosewood fingerboard once ...

Custom Design Order (based on Black Widow LP Kit ) Mahogany body with QUILTED MAPLE top, Thick veneer, Standard routing for TWO P-90 "Soapbar" pic...

Custom Design Order (based on CST-830 Kit ) 1. Ebony fretboard2. quilted maple veneer, a bit more3. with no hardware  the building time is about 25...

Custom Design Order (based on DEX-001B Kit ) Maple fretboardscale length: 26.5" (673.1mm)headstock shape and tuning pegs: same with the PIM-319 kit...

Custom Design Order  double neck 12+6 strings，explorer style, as pic 32 humbuckers for each neck. A tremolo bridge for the 6 stringSilver hardware ...

Custom Design Order (based on ESP MX-250) Set in neck  scale length: 24.75" / 628mm with a back plate, no other hardware Mahogany body  Ebony Finge...

Custom Design Order (based on Fender bass Kit ) Double reverse P-Bass (note pickups are installed reverse, pickup closet to the neck will be on the...